Ledgestone retaining wall construction provider in Colorado: If you’re building tiered retaining walls, set each tier back far enough to prevent the weight and pressure of the wall above from destroying the one below it. The rule of thumb is to separate wall tiers by a distance that’s no less than twice the height of the wall below. So if the bottom wall is 4 feet tall, the wall above it should be built at least 8 feet behind it. Walls more than 4 feet tall will likely require a building permit and a plan made by a licensed engineer. The engineer will specify the base’s width and depth, how far down the base course should be buried, and whether or not a geogrid (soil reinforcement system) should be used.
Block retaining walls are lightweight, cost-effective, and easy to build. They come in a wider range of styles and colours and are more versatile than concrete sleepers, creating curves and tiered walls can be achieved with ease. Block retaining walls have a wide footprint so if your access is tight or room on your property is at a premium then blocks would not be for you.
We also repair existing retaining walls. Many railroad tie walls or older concrete retaining walls which may or may not include rocks or boulders are beginning to show signs of failure. Often times a homeowner will build a DIY retaining wall that needs help after years of service. Colorado Retaining Wall specializes in the building and repair of retaining walls. Whether the wall is for a backyard or driveway of a residence or a commercial Shopping Center, we design and build large block walls for all Earth retention requirements. We have the ability to fortify the wall with shotcrete or soil nails which would include helical tie-backs or micropiles. Nearly every wall we build requires engineering and we have deep relationships with engineers that work hand-in-hand with our foremen regardless of the size of project. Please read our reviews and look and our photo gallery. Discover even more information on Best Retaining Walls Colorado.
Some of the simplest walls are “gravity” walls built of loose block. These walls depend on the mass and weight of the blocks to retain the earth. Landscape blocks are simply stacked one course on top of the other, with the joints staggered and each course slightly stepped back from the course beneath it. These small walls are used to retain small areas of earth, as seen with flower beds surrounding tree trunks. These simple designs usually work fine in a low-traffic area for a wall that doesn’t exceed about 2 feet high. Walls built with a combination of concrete block, mortar and rebar are also popular for small yard projects. The mortar and steel rods lock the blocks together for additional strength.
Reducing soil erosion, turning steep slopes into terraced backdrops, creating focal points in the landscape-retaining walls serve many purposes. Indeed, they are some of the most common ways to correct problems caused by hilly areas! Well-built retaining walls transform unworkable inclines into usable outdoor space for the garden. Despite their simple appearance, though, these walls require a good deal of planning-sometimes professional engineering-to keep their shape. Soil is heavy, especially when soaking wet from a recent rainstorm, so a basic retaining wall (four feet tall and 15 feet long) potentially has to support up to 20 tons of soil pressure. With every additional foot of height, the pressure of the soil increases substantially. Miscalculate your construction plans, and you could end up with a weak wall that risks bulging or, worse, collapsing altogether. For just this reason, retaining walls taller than four feet should be designed and constructed by the pros.